top of page

Eco-Dentistry: "Green," Environmentally Friendly Dental Care


Eco-dentistry or "green dentistry" refers to the delivery of oral health care and dental treatments using technologies, procedures and materials that promote environmental and planetary health. Eco-dentistry, a term trademarked by the Eco-Dentistry Association (EDA), incorporates high-tech innovations that enhance efficiency and effectiveness while reducing the amount of waste and pollution in the environment.

Dental practices that have gone green have incorporated technologies that improve their practices and procedures and make them more eco-friendly. Benefits include:


Less Radiation. Better Diagnostic Detail. For example, one of the most significant innovations for green dental practices is digital radiography, which eliminates the need for traditional film X-ray systems. With digital X-rays, dental practices dramatically reduce the harmful chemicals such as lead and silver that are released into the environment. Additionally, patients are exposed to approximately 90 percent less radiation with digital imaging compared to traditional X-rays. Also, images are available to your dentist immediately, are of better quality than traditional X-rays and can be enlarged for greater diagnostic detail and accuracy.

Less Chemical Contamination. Fewer Disposables. Green dental practices also use high-quality, biodegradable disinfectants and steam sterilization methods that don't require ventilation for chemical vapors, or a hazardous waste permit for disposal of toxic chemicals into a water supply. They also have energy-star washers and dryers on site to facilitate the use of cloth bibs, gowns, head rest covers and other supplies that are washable and can be reused. This eliminates the use of disposable paper products.

More Natural-looking Restorations. Less Heavy Metal Waste. At a time when you and others may be interested in more natural looking restorations, eco-dentistry embraces today's adhesive, metal-free dental restoratives using direct composite bonding or porcelain veneers (including Lumineers and other minimal and no-prep veneers) and crowns. These options serve two purposes:

First, they provide metal-free, esthetic smile treatments. Secondly, they help eliminate the heavy metal waste associated with silver amalgam fillings that could end up in the main water supply.

Because patients often prefer adhesion dentistry, tooth-colored restoration benefits the environment as well as the health of the patient by getting rid of the heavy metal waste from the main water supply.

The Safe Mercury Amalgam Removal Technique ( Smart )

The IAOMT safe amalgam removal protocol recommendations were most recently updated on July 1, 2016.  Also, on July 1, 2016, the IAOMT protocol recommendations were officially renamed as the Safe Mercury Amalgam Removal Technique (SMART), and a training course for IAOMT dentists to become certified in SMART was initiated.


All dental amalgam restorations, also commonly referred to as silver fillings, contain approximately 50% mercury,1and reports and research are consistent that these fillings emit mercury vapors.


Scientific research demonstrates that dental mercury amalgam exposes dental professionals, dental staff, dental patients, and fetuses to releases of mercury vapor, mercury-containing particulate, and/or other forms of mercury contamination. Furthermore, mercury vapor is known to be released from dental mercury amalgam fillings at higher rates during brushing, cleaning, clenching of teeth, chewing, etc., and mercury is also known to be released during the placement, replacement, and removal of dental mercury amalgam fillings. Essentially, an unsafe amalgam removal process releases mercury vapor and particles that can be harmful to the patient, the dentist, the dental staff, and the environment.


Utilizing the most up-to-date science and research, the IAOMT has developed extensive safety recommendations for removal of existing dental mercury amalgam fillings, including detailed protective measures that are to be utilized for the procedure. The IAOMT’s innovative recommendations build upon traditional safe amalgam removal techniques such as the use of masks, water irrigation, and high volume suction by supplementing these conventional strategies with a number of additional protective measures, the need for which have only recently been identified in scientific research.


The IAOMT protocol recommendations for amalgam removal are known as the Safe Mercury Amalgam Removal Technique (SMART). These recommendations include the following measures, which are listed here with scientific research:


• An amalgam separator should be properly installed, utilized, and maintained to collect mercury amalgam waste so that it is not released into the effluent from the dental office.


• Each room where mercury fillings are removed should have adequate filtration in place, which requires a high-volume air filtration system (such as IQAir Dental Hg FlexVac or similar device) capable of removing mercury vapor and amalgam particles generated during the removal of one or more mercury fillings.


• If possible, windows should be opened to reduce the mercury concentration in the air.

• The patient should be given a slurry of charcoal, chlorella, or similar adsorbent to rinse and swallow before the procedure (unless the patient declines or there are other contraindications making this clinically inappropriate).


• Protective gowns and covers for the dentist, dental personnel, and the patient should be in place. All present in the room should be protected because substantial quantities of particles generated during the procedure will elude collection by suction devices. It has been demonstrated that these particles can be spread from the patient’s mouth to the patient’s knee, and to the chest, shoulder, and neck of the dentist and dental assistant.


• Non-latex nitrile gloves should be utilized by the dentist and all dental personnel in the room.


• Face shields and hair/head coverings are to be utilized by the dentist and all dental personnel in the room.


• Either a properly-sealed, respiratory grade mask rated to capture mercury or a positive pressure, properly-sealed mask providing air or oxygen should be worn by the dentist and all dental personnel in the room.


• In order to protect the patient’s skin and clothing, a full body, impermeable barrier, as well as a full head/face/neck barrier under/around the dam, should be utilized.


• External air or oxygen delivered via a nasal mask for the patient also should be utilized to assure the patient does not inhale any mercury vapor or amalgam particulate during the procedure. A nasal cannula is an acceptable alternative for this purpose as long as the patient’s nose is completely covered with an impermeable barrier.



• A dental dam that is made with non-latex nitrile material should be placed and properly sealed in the patient’s mouth.


• A saliva ejector should be placed under the dental dam to reduce mercury exposure to the patient.


• During amalgam filling removal, the dentist should utilize an IQAir Dental Hg FlexVac or similar device in close proximity to the operating field (i.e., two to four inches from the patient’s mouth) to mitigate mercury exposure.


• High speed evacuation produces better capture when fitted with a Clean Up device, which is preferred.


• Copious amounts of water to reduce heat and a conventional high speed evacuation device to capture mercury discharges should be used to reduce ambient mercury levels.


• The amalgam should be sectioned into chunks and removed in as large of pieces as possible, using a small diameter carbide drill.


• Once the removal process is complete, the patient’s mouth should be thoroughly flushed with water and then rinsed out with a slurry of charcoal, chlorella or similar


• Dentists must comply with federal, state, and local regulations addressing the proper handling, cleaning, and/or disposal of mercury-contaminated components, clothing, equipment, surfaces of the room, and flooring in the dental office.


• During the opening and maintenance of suction traps in operatories or on the main suction unit, dental staff should utilize the appropriate personal protection equipment described above.

It is important to note that as a safety precaution, the IAOMT does not recommend amalgam filling removal for women who are pregnant or breast-feeding and that the IAOMT does not recommend that dental personnel who are pregnant or breast-feeding conduct work that disrupts amalgam fillings (including their removal).

bottom of page